babyonelife Finding your suitable readers for no beer in line kegerator is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for no beer in line kegerator including detail information and customer reviews. Let’s find out which is your favorite one.
967 reviews analysed
Bev Rite Beer Line Assembly – 3/16-Inch Id Vinyl – 5 Feet with Hex nut Assembly Clear
Pre assembled line ready to attach to your draft beer system. Total 5 feet of line with the required connectors. Made with Food Grade NSF Listed Beer Hose.
Inkbird ITC-308 Digital Temperature Controller Outletsmoker Thermostat, 2-Stage, 1100W, with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding
- Plug and play design, easy to use
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Support reading with Centigrade or Fahrenheit unit
- Maximum output load: 1100W(110V)
- Dual display window, be able to display measured temperature and set temperature at the same time
Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
15 Feet of 3/16" Clear Beer Line with Hexnut Assembly
- Assembly comes standard with 15 Feet of 3/16″ I.D. (7/16″ O.D.) Clear Beer Tubing made of Themoplastic Vinyl Hose
- This tubing meets and exceeds all rigid demands for beer dispensing.
- This assembly comes with one Plastic Snap Clamp (reusable clamp design)
- Hex Coupling Nut (connects to most standard keg coupler).
15 foot beer line assembly with hexnut
Draft Warehouse Beer Line with Connectors on Both Ends, 5-Feet
Inkbird Pre-Wired Digital Dual Stage Temperature Controller Outlet Thermostats 110V 1000W With 12" Stainless Probe Sensor DC Cord for Fermentation Kegerator ect
- 12inch Stainless Probe with 6.5ft DC cord
- Temperature calibration
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
- Support reading with Centigrade or Fahrenheit unit
Features:
This temperature probe can be submersed into beer direclty during fermentation.
No need to worry about inserting a smaller probe into a separate thermowell temperature probe.
It’s compatible with INKBIRD’s following controllers:ITC-308,ITC-306T,ITC-310T.
Plug and play design,easy to use;
Dual relay output,be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load:1100W(110V);
Dual display window,be able to display measured temperature and set temperature at the same time;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;
Specification
Temperature Control Range:-50~99°C/-58~210 °F
Temperature Resolution:0.1°C/0.1°F
Temperature Accuracy:±1°C(-50~70°C)/±1°F(-50~160°F)
Temperature Control Mode:On/Off Control,Heating and Cooling
Input Power:100~240VAC,50Hz/60Hz
Temperature Control Output:Max.10A,100V ~240VAC
Dimension Body:140x68x33mm(5.5×2.7×1.3inch)
Socket:85x42x24mm(3.3×1.7x1inch)
Input Power Cable Length:1.5m(5ft)
Output Power Cable Length:30cm(1ft)
Buzzer Alarm: High and Low Temperature Alarm
Over-temperature and sensor fault alarm
Ambient Temperature:-30~75°C/-22~167°F
Storage Temperature:-20~60°C
Measuring temperature range:-50℃~120℃
Sensor Type: NTC
Probe Material:Stainless steel
Probe Dimensions:6mmx300mm(0.24in x 12in)
Cord Length (excluding probe):2m (6.5ft)
Package Content:
1xITC308S temperature controller;
1xStainless Steel Probe DC Sensor
1xManual
Inkbird All-Purpose Digital Temperature Controller Fahrenheit &Centigrade Thermostat w Sensor 2 Relays ITC-1000
Taprite T752HP Two Product Dual Pressure Kegerator CO2 Regulator
- Large easy adjusting knob to increase or decrease delivery pressure
- Each regulator has a sentry shut-down safety built into the body that instantly protects the dispensing system in the unlikely event of regulator failure
- Outlet features shut-off with back flow check valve and 5/16″ I.D. hose barb nipple
- Permanent quad-ring seal on inlet nipple helps eliminate leaks, no need to use a fiber washer each time tanks are changed
- Blow-off is factory set at 55-65 psig
The TAPRITE ADVANTAGE Taprite regulators are built and tested in accordance with UL Standard 252 for compressed gas Regulators and UL 252A for compressed gas regulator accessories All Taprite regulator components and accessories are inspected by our Quality Department upon receipt in accordance with the requirements of MIL-STD-105E High CO volumetric flow provides continuity in product dispensing Polycarbonate bonnet will not chip, break, or fade 10 Micron Filter built in to keep contaminants out of regulator One repair kit for primary and secondary regulators. WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING.
Johnson Controls A19AAT-2C Freezer Temperature Controller (D132)
Use this handy controller to regulate the temperature in your freezer between 20 – 80F . Great for turning a chest freezer into a keg refrigerator. Strictly a mechanical thermostat for cooling only, it is simple to use and economical. It operates with a gas filled probe on a 6-foot capillary tube. When the gas contracts or expands in the probe, it triggers a mechanical device inside the control which turns the power on or off. There is no probe temperature readout on the dial, so keeping a thermometer inside the refrigerator is highly recommended to keep track of the actual temperature. On most refrigerators, the controller will allow a usable range of 37 to 80 F, while on freezers, the controller will be able to reach its full 20 to 80 F range. Features: Made of stainless steel. Adjustable with the turn of a knob. No drilling necessary. Plug unit into wall and then run the sensor into your freezer. Male and female plug in one. Specs: Temperature dimensions: 4 3/8″ H x 2 1/8″ W x 1 1/2″ D. Cord dimensions: 6′. Remote sensor bulb: 5 1/2″W. Remote sensor bulb capillary tube: 6′. Temperature range: 20 – 80F. Voltage: 120 VAC.
Flexzion All-Purpose Digital Temperature Controller + Contact Sensor 2 Relay Output Types Aquarium Thermostat 110V Stc-1000 with 2M Cable Probe Cooling Heating for Home Brew Hatch
- Switch the modes between refrigerating and heating
- Control temperature by setting the temperature setting value and the difference value
- A mini temperature controller, temperature calibration
- Refrigerating control output delay protection
- Alarm when temperature exceeds temperature limit or when sensor error
All-Purpose STC-1000 Digital Temperature Control Controller with Sensor 110V. All parameters can be set to default setting after short circuit. With large and clear LED display for better readability, it can be used for domestic freezer, water tanks, refrigerator, industrial chiller, boiler, steamer, industrial equipments and other temperature-controlled systems.
Specification:
- Temperature measuring range: -50 to +99 C
- Resolution: 0.1C
- Accuracy: +/-1 C (-50 to +70 C)
- Sensor error delay: 1 minute
- Power supply: 110VAC +/-10%, 50/60Hz
- Power consumption: </= 3W
- Sensor: NTC sensor (1PC)
- Relay contact capacity: Cool 10A/250VAC; Heat 10A/250VAC
- Ambient temperature: 0 to +60 C
- Storage temperature: -30 to +75 C
- Relative humidity: 20%~85% (No condensate)
- Front panel size: 75(L) x 34.5(W)mm
- Mounting size: 71(L) x 29(W)mm
- Product size: 75(L) x 34.5(W) x 85(D)mm
- sensor length: 2m include the probe
Package Content:
- 1x Mini Digital Temperature Controller Thermostat Aquarium
- 1x Temperature sensor probe with 2M cable
- 1x Instruction Manual
Conclusion
By our suggestions above, we hope that you can found No Beer In Line Kegerator for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy No Beer In Line Kegerator, eg:
- What are Top 10 No Beer In Line Kegerator for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 No Beer In Line Kegerator to buy?
- What are Top Rated No Beer In Line Kegerator to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) No Beer In Line Kegerator?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for No Beer In Line Kegerator.
- Before deciding to buy any No Beer In Line Kegerator, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose No Beer In Line Kegerator and What you should consider when buying the No Beer In Line Kegerator and Where to Buy or Purchase the No Beer In Line Kegerator. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 No Beer In Line Kegerator of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about No Beer In Line Kegerator.
