Top 10 Double Tap For Beverage Air Kegerator
Finding your suitable readers for double tap for beverage air kegerator is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for double tap for beverage air kegerator including detail information and customer reviews. Let’s find out which is your favorite one.
719 reviews analysed
The Weekend Brewer 2-way 5/16" Barb CO2 Splitter Distributor Manifold with integrated check valves
- LIGHT AND DURABLE aluminum body is lighter than steel but remains durable and long lasting. Aluminum is the industry standard for CO2 manifolds for their strength and resistance to corrosion. This manifold is ideal for homebrewers, bars, or anyone who is looking to easily split gas for beer or beverage dispensing and even for force carbonation.
- INTEGRATED HIGH QUALITY CHECK VALVE OUTPUTS prevent liquid from flowing into the manifold and your regulator. Don’t worry about dirty lines or ruined regulators ever again! Every integrated check valve ensures that your beer stays on the right side of the line.
- NO LEAKS due to ample thread tape and vigorous water testing after assembly. All manifolds are internally cleaned before assembly for the purest air possible. Don’t settle for mass produced, low quality manifolds from overseas. The Weekend Brewer manifold is the highest quality manifold on the market due to rigorous testing and quality control.
- MOUNTING HOLES allows for easy installation on walls or kegerators. Two screws or nails will easily secure your manifold to any surface for ease of use.
- MADE IN THE USA These manifolds are assembled by American workers in our Fayetteville, AR facility.
Kegco KC LH-542-2 Dual Product Premium Pro Series Dual Gauge Co2 Beer Regulator, Chrome
- Pro Series Dual Output Double Gauge Regulator pressurizes two kegs at once
- Adjust pressure knob by hand – no tools necessary!
- Output Ball Valve – 5/16″ Hose Barb x 1/4″ mnpt
- Integral Safety pressure relief valve releases at 45 PSI
- Home brew Kits and accessories
This Pro Series dual-output double gauge regulator is loaded with high end features! If you plan on dispensing two separate kegs but do not need to have independent keg pressures, then this regulator will work for you. This regulator has a Y splitter with two independent shut off valves, so you can still run a single keg if you want to. The Pressure Adjustment Knob can be turned by hand so it does not require tools. It also features a pressure release valve so you can release pressure from the system at the regulator. This is great a great feature if you have a keg coupler that does not include a pressure release valve.
Kegco Standard Two Keg Door Mount Kegerator Beer Tap Conversion Kit
- DUAL GAUGE REGULATOR: This Kegco 542-2 Commercial Grade Double Gauge Regulator has a y-splitter and two independent shut-off valves that let you dispense up to two kegs at the same pressure. It features a chrome plate brass body, two gauges to display PSI and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi.
- LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L “D” System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
- TWO CHROME BEER FAUCETS WITH BRASS LEVERS: Featuring a forged brass body and highly polished chrome finish, these NSF-approved Kegco CFBL beer faucets put a stylish finishing touch on your kegerator at a price you’ll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles.
- STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4″ length.
- INCLUDES DETAILED INSTRUCTIONS: This kegerator conversion kit includes easy-to-follow instructions and all of the high-quality draft dispense components you’ll need to quickly and easily convert your refrigerator into a high-performance draft beer dispenser.
The Standard Double Keg Kegerator Conversion Kit comes with everything you will need to successfully convert your refrigerator or chest freezer into a two product draft beer cooler. This keg tap kit is designed to run two completely separate kegs. Depending upon your refrigerator capacity, you can run 2 full size kegs, 2 pony kegs, 2 6 gallon kegs or any combination you choose. All the draft beer parts are of the highest commercial grade quality which are designed and built to last. Please Note: Beverage Factory is the only Authorized Reseller of Kegco products. Products purchased outside of Beverage Factory are not genuine Kegco parts and will not be covered under Kegco’s 1-year warranty.
Beer Faucet Beer Line Clamp – PERA Brand Including Draft Beer Faucet, ID 3/16" OD 7/16" Beer Line 5ft Length with Beer Line Connector Hex Nut and Clamp, Spanner Wrench 100% Quality Guarantee
- INCLUDE:Beer Faucet, Beer Line,Beer Line,Clamp,Beer Spanner
- Kegerator Beer Faucet Door Draft Shank With Elbow 1- 2/5″ X 3/16″ Brass Tube
- Stainless Steel Spanner Wrench is Convenient for assemble Beer Tower or Beer keg
- Bars, hotels, restaurants, living rooms and other supplies required to drink a beer ideal
- Quality Guarantee, Any Problem, Money Back or Replacement Guarantee.
Beer Faucet Beer Line Clamp – PERA Brand Including Draft Beer Faucet, ID 3/16″ OD 7/16″ Beer Line 5ft Length with Beer Line Connector Hex Nut and Clamp, Spanner Wrench 100% Quality Guarantee The beer faucet supporting the use of the refrigerator, the refrigerator cooling, mixing valve valve opens. Open the pressure gauge carbon dioxide, carbon dioxide is pressed into the barrels of beer from the tap wine released. Product design skills, furnishings generous, civilized health, ease of use, ready to drink. Bars, hotels, restaurants, living rooms and other supplies required to drink a beer ideal.
Double Tap Draft Beer Tower- Stainless Steel- 3" Diameter
Kegerator Tower Cooler for Beer Tower – Neoprene Design – Perfect Fit for Kegerator Tap Tower – Easy to Use Beer Tower Cooler Accessory (3.0" Diameter x 11.5" Height Double Tap Beer Tower)
- MAINTAINS ICY COLD BEER TOWERS: Ensure that every pour from your draft beer tower comes out icy cold. Even the first! Insulate your tower with this simple to use kegerator Tower Cooler accessory.
- END FOAM NOW: Maintain a constant temperature throughout your kegerator system with a Tower Cooler Chiller. Beer warms rapidly through a poorly insulated beer tower causing foam to form…in your cup!
- SAVE ELECTRICITY WITH LITTLE EFFORT: The added insulation of a Tower Chiller will reduce kegerator energy consumption.. Unlike kegerator tower cooler fans, the Tower Chiller takes seconds to install.
- MINIMIZE CONDENSATION: Kegerator towers sweat. Condensation buildup is a sign of poor insulation and will lead to corrosion and rust. Increase the lifetime of your kegerator and protect your beer tower.
- HIGH QUALITY MATERIAL AND BUILD: Crafted from high quality neoprene with heavy-duty double stitching. Easy to clean and guaranteed to last. 3” Diameter and 11.5” Height. Ideal for double tap beer towers.
TapRite Separate Pressure Adjusting 2 Product CO2 Regulator
Taprite T752HP Two Product Dual Pressure Kegerator CO2 Regulator
- Large easy adjusting knob to increase or decrease delivery pressure
- Each regulator has a sentry shut-down safety built into the body that instantly protects the dispensing system in the unlikely event of regulator failure
- Outlet features shut-off with back flow check valve and 5/16″ I.D. hose barb nipple
- Permanent quad-ring seal on inlet nipple helps eliminate leaks, no need to use a fiber washer each time tanks are changed
- Blow-off is factory set at 55-65 psig
The TAPRITE ADVANTAGE Taprite regulators are built and tested in accordance with UL Standard 252 for compressed gas Regulators and UL 252A for compressed gas regulator accessories All Taprite regulator components and accessories are inspected by our Quality Department upon receipt in accordance with the requirements of MIL-STD-105E High CO volumetric flow provides continuity in product dispensing Polycarbonate bonnet will not chip, break, or fade 10 Micron Filter built in to keep contaminants out of regulator One repair kit for primary and secondary regulators. WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING.
Dual System 2 Stage CO2 Pressure Regulator For Draft Beer Regulators and Kombucha Set Ups. Connect 2 Systems to 1 Tank. CGA-320 Connection
- HEAVY DUTY WITH TRIPLE GAUGES: TerraBloom 2 Stage CO2 Pressure Regulator is a heavy duty unit made with triple gauges to accurately measure working pressure in 2 systems simultaneously and 1 gauge showing CO2 tank pressure.
- PROFESSIONAL GRADE: This CO2 Regulator fits all standard CO2 tanks with CGA-320 inlets. You can adjust the working pressure in both of your systems via a control knobs in the front. Gas Shut Off Valve for easy keg/tank swaps. Safety Pressure relieve valve/Chrome Shut Off Valve to prevent beer from backing up into the gas lines.
- EASY INSTALLATION: All you need to install this CO2 Pressure Regulator is an adjustable wrench. Each unit is supplied with 2 O-ring washers. Always place a washer between the lock-down nut and the tank to ensure a tight seal. Replace washers regularly.
- VERSATILE APPLICATIONS: Works with 15.5 Gallon Kegs, 5 Gallon Kegs, 1.75 Mini Kegs, Half Barrels and Quarter Barrel Units. Barbed Gas Outlet Fitting Allows easy connection to many gas line types.
- WARRANTY: TerraBloom 30-day money back guarantee. 1 Year Warranty Against Manufacturing Defects.
TerraBloom 2 Stage CO2 Regulator is specifically designed for simultaneous use with 2 draft beer/kombucha setups (kegs or fermentation tanks). This CO2 regulator is equipped with 3 gauge displays: 1 for showing the working pressure in your 1st keg or fermentation tank, 1 for showing working pressure in your 2nd keg or fermentation tank, as well as 1 for showing the pressure in your CO2 tank. This regulator attaches to standard North American CO2 gas tanks with a male thread (standard CGA-320 connection). Red knobs on the regulator lets you adjust the working pressure without any additional tools in each individual kegs/fermentation tanks.
Kegco Direct Draw Kit for Commercial Kegerators and Jockey Boxes with 5 lb. CO2 Tank
- Specially designed by Kegco to include everything you’ll need to pressurize and tap a D system keg
- Commercial grade Kegco KT85D-L keg coupler allows you to tap all North American store bought kegs
- Monitor output pressure and tank capacity using the commercial grade Kegco 762 double gauge CO2 regulator
- Once filled, the brand new 5 lb. aluminum CO2 tank can dispense 4-5 full size kegs
- Includes 5 feet of blue air line, two plastic snap clamps, and a neoprene washer to ensure leak-free connection
This direct draw kit includes everything you need to pressurize and tap a D system keg. It’s the perfect addition to a commercial kegerator that does not include the dispense components, and can be paired with a jumper line to connect to and serve from a jockey box. It includes a brand new 5 lb. aluminum CO2 tank with a glossy red, corrosion-resistant epoxy finish (empty), commercial grade double gauge regulator, US lever handle D system keg coupler, 5′ air line assembly (5 feet of 5/16″ blue air tubing and two plastic air line clamps), and neoprene washer.
Conclusion
By our suggestions above, we hope that you can found Double Tap For Beverage Air Kegerator for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Double Tap For Beverage Air Kegerator, eg:
- What are Top 10 Double Tap For Beverage Air Kegerator for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Double Tap For Beverage Air Kegerator to buy?
- What are Top Rated Double Tap For Beverage Air Kegerator to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Double Tap For Beverage Air Kegerator?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Double Tap For Beverage Air Kegerator.
- Before deciding to buy any Double Tap For Beverage Air Kegerator, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Double Tap For Beverage Air Kegerator and What you should consider when buying the Double Tap For Beverage Air Kegerator and Where to Buy or Purchase the Double Tap For Beverage Air Kegerator. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Double Tap For Beverage Air Kegerator of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Double Tap For Beverage Air Kegerator.