The Best Samsung Electric Dryer Parts

Included in our Kits:

DC93-00634A Dryer Idler Pulley Assembly. Replaces your old tensioner arm bracket by maintaining correct tension on the drive belt to spin the drum.

(Replaces these models:
DC96-00882C DC96-00882B DC9707509b AP4210071 AP4373659 AP4213616 PS4216837 AP6038887 DV365etbgwra3 DV400gwhdwraa DV40J3000EWA2 DV45H7000EWA2 DV365ETBG DV42h5200ew DV42h5000ewa3 DV42h5200epa3 DV42h5000gwa3 DV42h5000ew DV448AEPXAA DV48h7400ewa2 DV419aewxaa DV50f9a6evwa2 DV45h7000ew 4455850).

6602-001655 belt. Attaches to the motor pulley and causes the drum load to spin as the motor is rotating. Our belts are made of black rubber with infused steel. This goes between the drive motor and the large clothes drum.

(Replaces these models: 6602-001314, 1935594, 6602-001314, EAP4133825, PS4133825).

This is an authorized aftermarket product. Fits with various Samsung brand models. It has a oem part # DC97-16742A.

DC97-14486A Complete Heater Element Assembly. Includes heater casing, heater element, thermostat, and high limit. * The hi-limit which is included has been removed and placed in a protected bag for shipping protections against damages. The hi-limit will need to be reattached once you receive the package. The reason for this has been bent spades and damages of the hi-limit from past shipments. *This is not a Whirlpool and/or a Samsung OEM product. The Whirlpool and/or a Samsung brand names and logos are the registered trademarks of their respective owners. Any use of the Whirlpool and/or a Samsung brand name or model designation for this product is made solely for purposes of demonstrating compatibility. “The trademarks, logos, and service marks (collectively the “Trademarks”) displayed herein Supplying Demand are registered and unregistered trademarks of Supplying Demand, its affiliates, and others. Nothing contained herein should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed herein without the written permission of Supplying Demand or such third party that may own the trademark displayed herein. Your misuse of the trademarks displayed herein, or any other content on this website, except as provided herein, is strictly prohibited.”

Genuine Original Equipment Manufacturer (OEM) parts! This heating element (part number DC47-00019A) is for dryers. Heating element DC47-00019A generates the dryer’s heat. Disconnect the power before installing this part. Wear work gloves to protect your hands. For Samsung & Kenmore.

The instructions work for most Samsung dryers, some may have some small differences. Here is how to replace the DC97-14486A heating element:

STEP1: Shut off the power to the dryer before working on it.
STEP2: Remove the two screws securing the top panel to the back of the dryer. Slide the top panel towards the back of the dryer to remove. You will need to remove the front control panel, some model have screws securing this. Remove them and pull up to remove, you should have enough extra wire to set the control panel on top of the dryer to get it out of the way. if not, then disconnect the wires and set it off to the side. Behind where the control panel was there will be four screws that secure the front panel of the dryer to the frame. Remove these four screws.
STEP3: Open the door of the dryer, there will be two screws that need to be removed at the bottom of the door frame area. With those two screws removed you should be able to tilt the front panel forward, remove the connector to the door switch, and remove the front panel.
STEP4: The heating element is located on the bottom right side of the dryer. To remove the element you will need to remove the wires to the heating element, thermal fuse, and thermostat. Then remove the mounting screw in the front and the whole heating element assembly should pull out the front of the dryer.
STEP5:To re-install the heating element you will need to put everything back in the reverse order. To test the heating element, you will need an Ohm meter or multi-meter. A good heating element should read approximately 9-10 ohms. A burned out element will have an infinite resistance, it won’t register anything.

Samsung DC93-00634A assy motor parts

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Samsung Electric Dryer Parts, eg:

• What are Top 10 Samsung Electric Dryer Parts for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Samsung Electric Dryer Parts to buy?
• What are Top Rated Samsung Electric Dryer Parts to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Samsung Electric Dryer Parts?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Samsung Electric Dryer Parts.
• Before deciding to buy any Samsung Electric Dryer Parts, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Samsung Electric Dryer Parts and What you should consider when buying the Samsung Electric Dryer Parts and Where to Buy or Purchase the Samsung Electric Dryer Parts. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Samsung Electric Dryer Parts of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Samsung Electric Dryer Parts.