Best D E K A Vitamin

08867 East Penn SPLICE, HARNESS TOP POST

These injectors flow 80 lbs/hr at 43.5 PSI (3 BAR) and even more at greater PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.

These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.

**We recently had a customer wanting to return injectors because his tuner did not know how to tune them. This is not acceptable because we cannot resell a used injector as new anymore once they have been used. So there are no returns accepted for used and installed injectors for obvious reasons. You must do your own research to determine if these injectors are compatible with your vehicle and if you are able to tune them for your specific application. Our job is to sell you an item as advertised and to ship it quickly. We cannot be held responsible to know if your tuner can tune them or if they fit your specific application. Returns are only accepted on new unused items as you received them. This is pretty common sense policy for fuel injectors in order to keep prices low and is typically not a problem, but wanted to have it in the description so that you are aware to verify through research that you are buying something that is compatible with your specific application.**

Enhanced electrolyte suspension system. Special glass mats absorb more electrolyte. Premium maintenance-free starting and cycle service power. Vibration protection safeguards battery performance over time. Fast recharging powers more electronics longer. Spillproof design. Designed to hand factory installed electronics to anything that plugs in or turns on, and still deliver. 2x the endurance in severe service, as well as 2x the cycle life. Equipped for the toughest conditions and the most intense electrical power demands. Ideal for tuner cars or off-road vehicles, offering superior power for high-performance equipment and a high-impact design for rugged, back road adventures. Fits vehicles with a battery group size of 34R. Battery primarily fits Ford, Mercury and Toyota full size vehicles, SUV’s, trucks and vans.

These injectors flow 80 lbs/hr at 43.5 PSI (3 BAR) and even more at greater PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.

These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.

**We recently had a customer wanting to return injectors because his tuner did not know how to tune them. This is not acceptable because we cannot resell a used injector as new anymore once they have been used. So there are no returns accepted for used and installed injectors for obvious reasons. You must do your own research to determine if these injectors are compatible with your vehicle and if you are able to tune them for your specific application. Our job is to sell you an item as advertised and to ship it quickly. We cannot be held responsible to know if your tuner can tune them or if they fit your specific application. Returns are only accepted on new unused items as you received them. This is pretty common sense policy for fuel injectors in order to keep prices low and is typically not a problem, but wanted to have it in the description so that you are aware to verify through research that you are buying something that is compatible with your specific application.**

Enhanced electrolyte suspension system. Special glass mats absorb more electrolyte. Premium maintenance-free starting and cycle service power. Vibration protection safeguards battery performance over time. Fast recharging powers more electronics longer. Spillproof design. Designed to hand factory installed electronics to anything that plugs in or turns on, and still deliver. 2x the endurance in severe service, as well as 2x the cycle life. Equipped for the toughest conditions and the most intense electrical power demands. Ideal for tuner cars or off-road vehicles, offering superior power for high-performance equipment and a high-impact design for rugged, back road adventures. Fits vehicles with a battery group size of 34. Battery primarily fits Chevrolet, Chrysler, Dodge, GMC and Jeep full size vehicles, SUV’s, trucks and vans.

Deka/East Penn #00161. CABLE, BOOSTER 2 GA 24′ 600P CU BLK/RED

Deka/East Penn #00298. CABLE, BATT TOP 4 GA 43″ W/AUX RED

Product Description: RV TRAILER TOWING WIRING; Coded Flat Wire, 14/4, 100′

100′ 14/4 Flat Wire. General purpose SAE type color coded all copper wire (60 deg C) extruded side by side. ; Weight: 6.8500

Recognized globally as one of the leading high quality manufacturers, with the broadest product offering, East Penn manufactures some of the finest battery accessory, wire, and cable products in the industry. Features include gravity lead casting, dual cable extrusion processing, and booster cable assembly. East Penn’s Wire and Cable Division is a division of the world’s largest and most modern single-site battery manufacturing facility.

East Penn 10 Gauge 100 Feet Black Spool is a single plastic primary conductor wire.