The Best Diy Home Lighting Automation

Product Description

Create Wireless, 3-Way, Remote Control, for Switched Lighting or Appliances. SK-8 Wireless 3-Way On/Off (Relay) Kit contains everything needed for creating a wireless, remote controllable, 3-way circuit with a 500 foot Radio Frequency (RF) range. The included SkylinkHome WE-001 Lighting Receiver In-Wall On/Off Switch replaces your existing wall switch allowing standard, local control of the wired load, with no neutral wire required. While the SkylinkHome TB-318 Wireless Battery-Operated Wall Mount Transmitter (also included) provides wireless remote control of the load wired to the WE-001 by communicating through Radio Frequency (RF). The TB-318 can mount almost anywhere, but will need to be located within 500 feet of the WE-001 In-Wall Lighting Receiver. This item is a wireless switch kit which includes both the WE-001 Lighting Receiver In-Wall On/Off Switch and TB-318 Wireless Battery-Operated Wall Mount Transmitter. Install without neutral wire! Easy installation DIY set-up. Expandable system – Advance your Home Control system by adding the SkylinkNet internet hub to control your light’s, appliances and home electronics from your Smartphone anywhere in the world with an internet connection.

From the Manufacturer

The SkylinkHome Wireless 3-Way On/Off Kit gives you the convenience of adding an extra wall switch without the hassle of running additional wiring. You can turn lights on and off from either end, making it ideal for stairwells, garages, bedrooms, or basements. Easily install by replacing your existing wall switch with the Skylink Wall Switch receiver (WE-001) and mount the Wireless Wall Switch transmitter with screws or double sided tape (included) anywhere you would like to control your lighting. Unlike many other brands of wall switches, our Skylink HomeControl Wall Switch receiver doesn’t require neutral wiring, making the installation even easier. The Wireless Wall Switch transmitter is operated by a long life lithium battery and carries a signal up to 500 feet away in an open area. You can also add up to eight Skylink wireless transmitters, such as the Wireless Wall Switch (TB-318), Motion Sensor (ID-318) or Remote Controls (TC-318 Series), to control your Wall Switch receiver. To give the Skylink Wall Switch receiver a more stylish loo, snap on a decorative cover, TM-002 (sold separately), to the opening of the Wall Switch receiver (WE-001). Once the Snap-On Cover has been placed on the opening of the Wall Switch receiver, simply press the button on the cover to turn the lights on/off.

Product Description

The SkylinkHome WR-318 Lighting Receiver In-Wall On/ Off, Relay or Dimmer Switch with Wireless Snap On Transmitter is an in-wall replacement/ upgrade for your current light switch. This bundle combines the WR-001 In-Wall Lighting Receiver and TM-318 Snap-On Wireless Remote The switch features a touch-sensitive surface allowing you to brush your finger across the panel to adjust the lighting. Note: This wall switch is not compatible with LED lights.

Advance your home control system by adding the SkylinkNet internet hub and control your light’s, appliances and home electronics from your Smartphone anywhere in the world with an internet connection.

From the Manufacturer

The SkylinkHome On/Off/Dim Wall Switch Receiver Kit (WR-318) gives you the convenience of controlling your lighting with a Snap-On Remote. This is ideal to turn off the lights from your bedside, turn the lights on as you pull up on your driveway or dim the lights for a movie without getting up to do it. Simply replace your existing wall switch with the new Skylink Wall Switch receiver. Unlike many other brands of wall switches, our Skylink HomeControl Wall Switch receiver doesn’t require neutral wiring, making the installation even easier. Once properly installed you will be able to wirelessly turn the lights on and off, or dim and brighten with the wall switch or the included Snap-On Remote. The remote can be snapped into the opening of the Wall Switch receiver and be used as a remote Wall Switch. The Snap-On Remote carries a signal up to 500 feet away in an open area. You can also add up to eight Skylink wireless transmitters, such as the Wireless Wall Switch (TB-318), Motion Sensor (ID-318) or Remote Controls (TC-318 Series), to control your Wall Switch receiver.

Parameter of smart controller：
Product model: KC868-H32W
Working Voltage: DC 12V
Material: Fire resistance ABS, Metal shell
Working Temp: -4F~158F
Working Humidity: 20%RH~80%RH
Output Load: Each 250V/5A
Communication mode: WiFi/RS232
Input port qty: 6 ports
Output port qty: 32 ports

Function of smart controller:
1. Remote ON/OFF – Turn electrical devices ON/OFF from anywhere.
2. APP/PC Support– Free iOS&Android mobile App and PC software.
3. Independent control – Control each gang separately.
4. Sync Status –Real-time device status provided to App.
5. Share Control – Share your account with your family to control your smart home.
6. Timing – Set scheduled to turn ON/OFF at specified regular time.
7. Scene – Turn ON/OFF some specific switch of devices with one tap.
8. Smart Scene – Can be triggered ON/OFF by kinds of sensor (Need support by sensor).
9. Supporting secondary development for programmer.
10. Control methods:
a. Mobile phone APP remote control, PC local or remote control.
b. Local Control: PC software; Control by yourself for programmer(For engineers: use controller communication protocol).
c. Remote Control: PC software, Mobile APP, Control by yourself for programmer.

Features of smart controller:
1. Use ARM processor, industrial stability and good anti-jamming.
2. Control channel up to 32 and sensor channel up to 6.
3. Support LAN and Internet, It can also be used without internet.
4. Free Mobile app and PC software.
5. Support multilingual customization.
6. Each device name/icon support self-modification. 7. Software Title Name Information support self-modification.
8. For Engineer: Provide the controller’s communication protocol, which can be redeveloped.

Package Weight: 2.65 lb
Package Size: 13.39 x 6.54 x 2.76 inch

Product Parameter:
Product model: KC868-H8W
Working Voltage: DC 12V
Material: Fire resistance ABS, Metal shell
Working Temp: -4F~158F ( -20℃~70℃)
Working Humidity: 20%RH ~ 80%RH
Output Load: Each 250V/10A
Communication mode: Ethernet/RS232
Input port qty: 8 ports
Output port qty: 8 ports
Output power: 12V/9V
Product Dimension: 5.71 x 4.61 x 1.57 inch

Product Function:
1. Support RS232 and Ethernet communication mode.
2. Remote controlling the opening/closing of 8 routes or 8 groups’ circuits.
3. Support 8 ports input of sensor switching value.
4. Support secondary development.
5. Support APP remote controlling.
6. Widely used for lights controlling of kinds of occasion (like Indoor, theater or Amusement Park etc) and switching of mechanical equipments, and management of the computers in the cyber bar and so on.

Product Features:
1. Highly reliable connection column, independent and isolated route, Make sure the products more stable and safe.
2. Relay output pole connection method as shown below, each color represents one route, each route is equal an independent switch.
3. Adopting ARM core chip as the core processor, industrial stability and good anti-jamming.
4. Professional shell design, fixed through the positioning hole, or fixed on the guide rail directly.
5. Perfect power input filter, ensuring adequate capacitance.
6. Adopting advanced and stable communication protocol, providing reliable and smooth communication procedures.
7. Provide the upgrade tool, the products can be upgraded by the users. 8. Provide free new edition host computer software.

Package Included:
1﹡Smart Controller (8 Gang Wifi)
1﹡Power Adapter
1 * Antenna
1﹡User Manual
1﹡Buckle

Package Weight: 1.87 lb
Package Size: 13.39 x 6.54 x 2.76 inch

Product Description

The SkylinkHome PA-318 Plug-in On/ Off Receiver for Indoor or Outdoor use allows you to plug in electronic devices such as lamps, fans, home electronics, christmas lights, holiday displays and more to control wirelessly. Each PA-318 receiver can pair with up to 8 different SkylinkHome remote transmitters which provides an wireless operation range up to 500 feet away. (Remotes are Sold Separately – Search SkylinkHome Remote Control) Easy DIY Installation, simply plug in the receiver, plug in the electronics and pair the transmitter for wireless remote home automation control. The plug-in receiver also featues a countdown timer mode setting so you can have it turn off automatically after 5, 30 or 60 minutes.

Advance and upgrade your Skylink Wireless HomeControl System by adding the SkylinkNet Internet hub (Model HU-100 or SkylinkNet Starter Kits SK-150, SK-200, SK-250) to control lighting, small appliances and home electronics from your Smartphone anywhere in the world with the SkylinkNet App. Lifetime Support, Call: 1-800-304-1187, Email: [email protected]

From the Manufacturer

Skylink’s Indoor/Outdoor PA-318 was designed to operate a 1,500 watt load at 120 volts of alternating current (120VAC) for either lights or small appliances. This plug-in receiver can be paired to a max of 8 transmitter controllers. To use this device simply plug the PA-318 into an Indoor/Outdoor AC outlet, then plug in the device you wish to control. After the device is properly installed and programmed you will be able to control lights or small appliances wirelessly with any Skylinkhome transmitter. You can also add more plug-in controls, wall switches, and variety of SkylinkHome transmitters for even more control. For Smartphone and App control, upgrade your system and add an SK-200 Connected Home Alarm System to control and monitor your home from anywhere in the world.

Product Description

The SkylinkHome WR-001 Lighting Receiver In-Wall On/ Off, Relay or Dimmer Switch is and in-wall replacement/ upgrade for your current wall light switch. The switch features a touch-sensitive surface allowing you to brush your finger across the panel to adjust the lighting. Add an unlimited number of transmitters to this receiver starting with the TM-318. The TM-318 is a snap on wireless remote was strategically designed for cohesion with the WR-001 or consider adding a snap-on decorative cover, Model TM-001 (sold separately) on the opening of the Wall Switch receiver for a stylish look. Note: This wall switch is not compatible with LED lights.

Advance and upgrade your Skylink Wireless HomeControl System by adding the SkylinkNet Internet hub (Model HU-100 or SkylinkNet Starter Kits SK-150, SK-200, SK-250) to control lighting, small appliances and home electronics from your Smartphone anywhere in the world with the SkylinkNet App. Lifetime Support, Call: 1-800-304-1187, Email: [email protected]

From the Manufacturer

The SkylinkHome On/Off/Dimmer Wall Switch Receiver (WR-001) gives you the convenience of controlling your lighting with a variety Skylink Transmitters (sold separately). This is ideal to turn the lights on as you pull up on your driveway or to turn off the lights from your bed so you don’t have to get up and do it. Simply replace your existing wall switch with the new Skylink Wall Switch receiver. Unlike many other brands of wall switches, our Skylink Wall Switch receiver doesn’t require neutral wiring, making the installation even easier. Once properly installed you will be able to wirelessly turn the lights on and off with up to eight Skylink wireless transmitters, such as the Remote Controls (TC-318 Series), LCD Deluxe Remotes (TD-318), Keychain Remotes (LK-318), Wireless Wall Switches (TB-318), Motion Sensors (ID-318) or Snap-On Remotes (TM-318). With the SkylinkNet Internet Hub (HU-100), you can start controlling your Skylink Wall Switch with your Smartphone by downloading our free SkylinkNet App for iOS and Android. To give the Skylink Wall Switch receiver a more stylish look, snap on a decorative cover, TM-001 (sold separately), to the opening of the Wall Switch receiver. Once the Snap-On Cover has been placed on the opening of the Wall Switch receiver, simply press the cover to turn the lights on/off, or tap and hold the cover to dim/brighten the lights. *For dimming function, light bulbs must be dimmable. TECHNICAL SPECIFICATIONS Input Voltage: 120V AC, 60Hz Maximum Load: 300W at 120VAC Operating Frequency: 318MHz Range: Up to 500 feet in open area Standby Current: 0.2mA Minimum Load: 10W Operational Temperature: -4° F – 140° F (-20° C – 60° C) Humidity: 5%-95% Contact our Customer Support Team if you would like to: – find out the up-to-date specifications – know more about features and applications – download documents, i.e. user’s instructions – order Skylink products or if you have difficulty getting products to work, please: 1. visit our FAQ section at www.skylinkhome.com or 2. email us at [email protected] , or 3. call our toll free at 1-800-304-1187 from Monday to Friday, 9 am to 5 pm EST. Fax (800) 286-1320

Parameter:
Product model: KC868-H32
Working Voltage: DC 12V
Material：Fire resistance ABS, Metal shell
Working Temp: -4F~158F
Working Humidity: 20% RH~80% RH
Output Load: Each 250V/5A
Communication mode: Ethernet/RS232
Input port qty: 6 ports
Output port qty: 32 ports

Function:
1. Remote ON/OFF: Turn electrical devices ON/OFF from anywhere.
2. APP/PC Support: Free iOS&Android mobile App and PC software.
3. Independent control: Control each gang separately.
4. Sync Status: Real-time device status provided to App.
5. Share Control: Share your account with your family to control your smart home.
6. Timing: Set scheduled to turn ON/OFF at specified regular time.
7. Scene: Turn ON/OFF some specific switch of devices with one tap.
8. Smart Scene: Can be triggered ON/OFF by kinds of sensor (Need support by sensor).
9. Supporting secondary development for programmer.
10. Control methods:
a. Mobile phone APP remote control, PC local or remote control.
b. Local Control: PC software; Control by yourself for programmer(For engineers: use controller communication protocol).
c. Remote Control: PC software, Mobile APP, Control by yourself for programmer.

Features:
1. Use ARM processor, industrial stability and good anti-jamming.
2. Control channel up to 32 and sensor channel up to 6.
3. Support LAN&Internet, It can also be used without internet.
4. Support multilingual customization.
5. Each device name/icon support self-modification.
6. Software Title Name Information support self-modification.
7. For Engineer: Provide communication protocol, which can be redeveloped.

Package Included:
1﹡Smart Controller
1﹡Voice Control Module
1﹡Power Adapter
1﹡Power cord
1﹡User Manual
2﹡Buckle

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Diy Home Lighting Automation, eg:

• What are Top 10 Diy Home Lighting Automation for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Diy Home Lighting Automation to buy?
• What are Top Rated Diy Home Lighting Automation to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Diy Home Lighting Automation?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Diy Home Lighting Automation.
• Before deciding to buy any Diy Home Lighting Automation, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Diy Home Lighting Automation and What you should consider when buying the Diy Home Lighting Automation and Where to Buy or Purchase the Diy Home Lighting Automation. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Diy Home Lighting Automation of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Diy Home Lighting Automation.