The Best Home Hardware Gas Station Ontario

Unit includes convertible folded paper towel module and 12-gallon waste receptacle module which can be interchanged with an automatic, universal or touch-free roll towel module and 18-gallon waste receptacle module, respectively. Cabinet is not replaced when changing modules. Satin-finish stainless steel. Seamless beveled flange. Dispenses 600 C-fold or 800 multifold towels. Removable waste receptacle is locked into cabinet. Receptacle is 8″ (205mm) deep with capacity of 12 gallon; extends 4-1/8″ from wall. Skirt for semi-recessing. Material: Cabinet- 18-8 S, type-304, heavy-gauge stainless steel. All-welded construction. Exposed surfaces have satin-finish. Flange- 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Drawn and beveled, one-piece, seamless construction. Skirt- 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Door- 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Double-pan-back construction. Secured to cabinet with a full-length stainless steel piano-hinge. Equipped with a semi-concealed tumbler lock keyed like other Bobrick washroom accessories. Paper towel dispenser- 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Rounded towel tray has hemmed opening to dispense paper towels without tearing. Capacity: 600 C-fold or 800 multifold paper towels; Waste receptacle- 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Front and sides of bottom and all top edges are hemmed for safe handling. Secured to cabinet with a tumbler lock keyed like other Bobrick washroom accessories. Equipped with interior hooks for optional vinyl liner. Paper towel dispenser accommodates C-fold or multifold paper towels without adjustment or use of adapters. To adapt to changing needs of washrooms, this unit is field convertible with the Universal, Touch-Free Roll Towel Dispenser or Universal, Automatic Roll Towel Dispenser.

Type 304 stainless steel with satin finish. Dispenses single or half fold paper Toilet seat covers. Fill from bottom through concealed opening. Capacity: 250 seat covers. 15-3/4 inch wide, 11 inch high, 2 inch deep. – manufacturer: Bob Rick washroom equipment.

Surface mounted hand dryer shall have either 18-gauge, type-304 stainless steel with #4 satin-finish vertical grain (B-7128) or 22-gauge mild steel zinc plated with high-gloss white epoxy paint finish (B-7120) covers with UL 94-5VA black plastic trim. Slim profile cover shall project no more than 4″ (100mm) from the finished face of wall to comply with barrier-free accessibility guidelines (including ADAAG in the USA). Unit shall be equipped with uniquely designed (patent pending) dual air outlets that provide a swirling circulation of airflow for (less then 25 seconds) hand dry. Motor shall be 1/7 hp, universal type on resilient mounting with sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at nondrive end; equipped with automatic thermal-overload switch. Heating elements shall be located on outlet side of fan, shall heat air without hot spots, be inaccessible to vandals, and protected by an automatic thermal-overload switch. Electronic sensor shall automatically turn dryer on when hands are held under air-outlet opening and across path of sensor. Dryer shall turn off automatically when hands are removed. Sensor shall automatically shut dryer off approximately 1-1/2 minutes after dryer turns on if an inanimate object is placed across air-outlet opening. After inanimate object is removed, electronic sensor shall automatically reset itself and dryer shall operate normally. Unit shall be cULus Listed, and/or VDE approved, CE marked. Unit shall comply with EU Directive “Restriction of Hazardous Substance” (RoHS) requirements for non-use of certain hazardous substances in the production of electronic products. Unit shall be protected by a limited 10 -year warranty on all parts except motor brushes. Motor brushes shall be warranted for three years from date of purchase. Mounting base: 20-gauge (1.5mm) plated steel with four 0.236″ (6mm) diameter mounting holes.

Holds one pack of 250-count, single-fold or half-fold seat covers (sold separately). Made with virgin iron and ferrous alloys. 65 percent post-consumer recycled content. 100 percent total recovered content. Measures 15-3/4″ Width by 2-3/16″ depth by 11-1/4″ height

Product Description

Straight grab bar. 42″ (1065mm) long, 1-1/4″ (32mm) diameter tubing. Constructed of 18 gauge (1.2mm), type 304 satin finish stainless steel tubing. Concealed mounting flange 1/8″ (3mm) thick, type 304 stainless steel plate, 2″ width by 3-1/8″ height (50 x 80mm), with screw holes for concealed anchors. Cover is 22 gauge (0.8mm), type 304 stainless steel with satin finish, 3-1/4″ (85mm) diameter. Cover snaps over mounting flange to conceal screws.

From the Manufacturer

Grab bar and concealed mounting plates shall be constructed of type-304 stainless steel with satin finish

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Home Hardware Gas Station Ontario, eg:

• What are Top 10 Home Hardware Gas Station Ontario for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Home Hardware Gas Station Ontario to buy?
• What are Top Rated Home Hardware Gas Station Ontario to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Home Hardware Gas Station Ontario?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Home Hardware Gas Station Ontario.
• Before deciding to buy any Home Hardware Gas Station Ontario, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Home Hardware Gas Station Ontario and What you should consider when buying the Home Hardware Gas Station Ontario and Where to Buy or Purchase the Home Hardware Gas Station Ontario. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Home Hardware Gas Station Ontario of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Home Hardware Gas Station Ontario.