Top 10 Home Hardware Locations In Toronto

Product Description

Surface mounted soap dispenser shall be type-304 stainless steel with satin-finish. Corrosion-resistant valve shall dispense commercially marketed all-purpose hand soaps. To prevent corrosion of the tank, use only chloride-free pH-neutral liquid soaps. Valve shall be operable with one hand and with less than 5 pounds of force (22.2 N) to comply with barrier-free accessibility guidelines (including ADAAG in the U.S.A.). Container shall be equipped with a clear acrylic refill-indicator window; a locked, hinged stainless steel lid for top filling; and shall have a capacity of 40- fl oz (1.2L). Unit shall have concealed, vandal-resistant mounting. Vertical tank is satin-finish stainless steel. Valve dispenses all-purpose hand soaps. Capacity: 40-fl oz (1.2-L). Soap refill window. Concealed wall fastening. Hinged filler-top requires special key to open. Vandal resistant. Measures 4-3/4″ width by 8-1/8″ height. Wall to push-button, 3-1/2″ (90mm).

From the Manufacturer

Surface-mounted soap dispenser shall be constructed of type-304 stainless steel with satin finish.

Surface mounted hand dryer shall have either 18-gauge, type-304 stainless steel with #4 satin-finish vertical grain (B-7128) or 22-gauge mild steel zinc plated with high-gloss white epoxy paint finish (B-7120) covers with UL 94-5VA black plastic trim. Slim profile cover shall project no more than 4″ (100mm) from the finished face of wall to comply with barrier-free accessibility guidelines (including ADAAG in the USA). Unit shall be equipped with uniquely designed (patent pending) dual air outlets that provide a swirling circulation of airflow for (less then 25 seconds) hand dry. Motor shall be 1/7 hp, universal type on resilient mounting with sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at nondrive end; equipped with automatic thermal-overload switch. Heating elements shall be located on outlet side of fan, shall heat air without hot spots, be inaccessible to vandals, and protected by an automatic thermal-overload switch. Electronic sensor shall automatically turn dryer on when hands are held under air-outlet opening and across path of sensor. Dryer shall turn off automatically when hands are removed. Sensor shall automatically shut dryer off approximately 1-1/2 minutes after dryer turns on if an inanimate object is placed across air-outlet opening. After inanimate object is removed, electronic sensor shall automatically reset itself and dryer shall operate normally. Unit shall be cULus Listed, and/or VDE approved, CE marked. Unit shall comply with EU Directive “Restriction of Hazardous Substance” (RoHS) requirements for non-use of certain hazardous substances in the production of electronic products. Unit shall be protected by a limited 10 -year warranty on all parts except motor brushes. Motor brushes shall be warranted for three years from date of purchase. Mounting base: 20-gauge (1.5mm) plated steel with four 0.236″ (6mm) diameter mounting holes.

To remove concealed wall plate from back of flange and Mounting bracket, loosen setscrew. Mount wall plate so prongs are at top; secure with two sheet-metal screws, furnished by manufacturer, at points indicated by an S. Engage Mounting bracket onto prongs of wall plate, then secure unit into position by tightening setscrew at bottom of flange. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with screws furnished, or provide 1/8″ (3mm) toggle bolts or expansion bolts. For partitions with particle-board or other solid core, secure with sheet-metal screws furnished, or provide through-bolts, nuts, and washers. For hollow-core metal partitions, provide solid backing into which the furnished sheet-metal screws can be secured. Cap shall be 14 gauge, welded to the support arm.

Satin-finish stainless steel. Open top. Vinyl wall bumper, rubber feet. Liner hooks. Capacity: 21-gal. (79.5L). Unit 14″ by 14″ (355 x 355mm) at top, 30″ (760mm) high. Two spring-loaded, self-closing doors, which have an international graphic symbol to identify waste disposal, are secured with full-length, stainless steel piano-hinges. Entire cover is removable for easy servicing of receptacle. Vinyl bumper strip and rubber feet on waste receptacle protect wall and floor surfaces. Measures 14″ width by 30″ height.

Product Description

This ClassicSeries® Recessed Multi-Roll Toilet Tissue Dispenser (B-3888) from Bobrick is constructed from 22 gauge type 304 stainless steel that is all-welded and given a satin finish to provide superior durability and corrosion resistance against environmental moisture, hose-down maintenance and strong cleaning agents. Two standard toilet paper rolls can be housed in the theft-resistant cabinet of the dispenser. The extra roll automatically drops into place when the bottom roll is depleted. The recessed design of this dispenser is perfect for stalls with limited space.

From the Manufacturer

Recessed multi-roll toilet tissue dispenser shall be constructed of type-304 stainless steel with satin finish and all-welded construction

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Home Hardware Locations In Toronto, eg:

• What are Top 10 Home Hardware Locations In Toronto for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Home Hardware Locations In Toronto to buy?
• What are Top Rated Home Hardware Locations In Toronto to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Home Hardware Locations In Toronto?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Home Hardware Locations In Toronto.
• Before deciding to buy any Home Hardware Locations In Toronto, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Home Hardware Locations In Toronto and What you should consider when buying the Home Hardware Locations In Toronto and Where to Buy or Purchase the Home Hardware Locations In Toronto. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Home Hardware Locations In Toronto of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Home Hardware Locations In Toronto.